Step-by-Step Guide to Wiring a Texecom Bell Box
Introduction
The Texecom Bell Box is a self-contained security system designed for easy installation and use. This guide will provide you with a step-by-step overview of the wiring process for a Texecom bell box.
Materials Required
* Texecom Bell Box * Screwdriver * Wire cutters/strippers * Electrical tape * Masking tape (optional)
Step-by-Step Instructions
Step 1: Power Supply
Connect the provided power supply to the "Power" terminals on the bell box using the supplied screws.
Step 2: Wiring the Zone
Identify the zone you want to connect. Locate the corresponding zone terminals on the bell box. Strip the ends of the wire from the zone and connect them to the zone terminals.
Step 3: Wiring the Bell
Locate the "Bell" terminals on the bell box. Strip the ends of the wire from the bell and connect them to the "Bell" terminals.
Step 4: Wiring the Tamper Switch
Connect the tamper switch wires to the "Tamper" terminals on the bell box. Ensure the tamper switch is properly aligned and activated.
Step 5: Secure the Wiring
Use electrical tape or masking tape to secure all wire connections and ensure they are protected from movement or damage.
Step 6: Test the System
Activate the zone and listen for the bell to sound. If the bell does not sound, check the wiring connections and make sure the power supply is connected properly.
Additional Notes
* Refer to the official Texecom installation manual for more detailed instructions. * Ensure the bell box is installed in a secure and accessible location. * Consider using a qualified electrician if you are not comfortable with electrical work.
Comments